Construction & Demolition Waste in Sydney & NSW
Reliable skip bin and bulk collection for concrete, timber, metal, plasterboard, bricks, and mixed C&D waste — with resource recovery prioritised ahead of landfill. Mini skips through to hook bins, sized to your build or demolition project. No lock-in contracts.
Skip bins sized to your site — from a bathroom reno to a full demolition
What Is Construction & Demolition Waste?
Construction and demolition (C&D) waste is the material generated during building, renovation, and demolition work — concrete, bricks, timber, metals, plasterboard, glass, roofing material, and mixed rubble. It's one of the largest waste streams in Australia by volume, and much of it is genuinely recyclable: concrete and masonry can be crushed into road base, timber can be mulched or reused, and metal offcuts have real scrap value. In NSW, C&D waste is subject to the NSW Waste Levy, so how well it's sorted directly affects your project's waste costs, not just its environmental footprint.
Builders, demolition contractors, developers, and homeowners undertaking renovations all generate C&D waste and carry a duty of care for where it ends up — including correctly identifying and separately managing any asbestos-containing material before general demolition proceeds. Zero Waste Services manages the full process — bin sizing, scheduled or on-call collection, source separation for better recovery rates, and documentation for your project records.
⚠️ Asbestos — Know Before You Demolish
Many buildings constructed or renovated before the early 2000s contain asbestos in sheeting, tiles, insulation, or roofing. Asbestos-containing material must be identified before demolition begins and removed by a licensed asbestos removalist — it cannot go into a general C&D skip bin. Disturbing or disposing of asbestos incorrectly is a serious offence with penalties reaching into the hundreds of thousands of dollars. Call 1300 0WASTE if you suspect asbestos on your site, or see our Hazardous Waste Disposal service.
Construction & Demolition Materials We Collect
We handle every common material generated on a build or demolition site, from a single mini skip to a full-scale project, across NSW, ACT, and Victoria.
Concrete, Bricks & Masonry
Broken concrete, bricks, and pavers — crushed and recycled into road base and aggregate wherever possible.
Timber & Wood Waste
Framing offcuts, formwork, pallets, and demolition timber — diverted to mulching or recycling where condition allows.
Metal Offcuts & Reinforcement
Steel reinforcement, roofing, fixtures, and metal offcuts recovered for scrap recycling.
Plasterboard & Drywall
Gypsum plasterboard offcuts and demolition waste — kept separate from general rubble to enable recycling.
Asbestos-Containing Materials
Requires licensed removal and dedicated collection — never accepted in a general C&D skip bin. See our Hazardous Waste Disposal service.
Soil & Excavated Material
Clean fill, excavated soil, and site cut material — assessed and collected in bulk for reuse or licensed disposal.
Roofing Materials
Tiles, metal roofing, and guttering removed during re-roofing or demolition work.
Mixed General C&D Waste
Combined site waste where separation isn't practical — sorted post-collection to recover what can be diverted from landfill.
Bin Sizes for Every Project
The right bin size and type depends on your project scale, material mix, and site access.
Mini Skips (2m³–4m³)
Bathroom renovations, small clean-outs, and single-room strip-outs. Fits on most residential driveways.
Mid-Size Skips (6m³–10m³)
Kitchen renovations, full strip-outs, and small extensions generating a moderate volume of mixed waste.
Large Skips & Hook Bins (15m³–30m³)
Full house builds, demolitions, and commercial projects requiring high-capacity bins and frequent turnaround.
Dedicated Source-Separated Bins
Separate bins for concrete, timber, or metal on larger sites — improving recovery rates and reducing your waste levy exposure.
Construction & Demolition Waste in 5 Steps
From your first contact to your final site clean-up — Zero Waste Services manages every step of the process.
Contact & Describe Your Project
Call 1300 0WASTE or complete our online quote form. Tell us the project type, estimated waste volume, material mix, and site access.
Site Assessment & Itemised Quote
We recommend the right bin size and number, plus whether source separation makes sense for your project. A transparent, itemised quote follows within 24 hours.
Bin Delivery & Placement
Bins are delivered and positioned to suit your site access and any council permit requirements for street placement.
Scheduled or On-Call Collection
Bins are swapped or collected as your project progresses — weekly, on-call, or timed to key project milestones.
Final Clean-Up & Reporting
Once the project wraps up, we handle final collection and can provide a waste report showing your recycling and landfill diversion rate.
Local C&D Waste Experts You Can Trust
With 70 years of combined industry expertise, our team keeps your site clear and your waste costs down — from a single skip to a full demolition project.
Licensed Waste Contractor
Fully licensed for construction and demolition waste collection, transport, and recycling across NSW, ACT, and Victoria.
Full Bin Range
Mini skips through to 30m³ hook bins mean we match the right equipment to your project scale and site access.
70 Years Combined Expertise
Our specialists have serviced builds and demolitions across every relevant NSW industry sector — and know how to keep your project moving.
Waste Tracking & Reporting
Documentation and reporting on request — useful for green building ratings, client reporting, and project records.
Resource Recovery First
Concrete, timber, and metal are recycled wherever the material condition and volume allow — reducing landfill and levy costs.
Flexible Scheduling
Same-day or next-day delivery, bin swaps timed to your build schedule, and on-call collection when a project runs ahead or behind.
Residential & Commercial
From a homeowner's bathroom reno to a commercial demolition project — services scale to your volume and budget.
No Lock-In Contracts
Straightforward, transparent agreements — we earn your ongoing business on service quality, not contract length.
Duty of Care — What NSW Law Requires for C&D Waste
NSW law places a duty of care on every generator of construction and demolition waste — and asbestos identification adds an extra layer of responsibility before any demolition begins.
- Identify asbestos-containing material before demolition and engage a licensed asbestos removalist if found
- Engage only licensed contractors for C&D waste collection and transport
- Separate recyclable streams (concrete, timber, metal) from mixed rubble wherever practical
- Ensure waste reaches a facility licensed to receive that specific material type
- Keep bins clear of hazardous items — paint, chemicals, batteries, and asbestos never belong in a general skip
- Retain waste dockets and reporting to support council permits and project compliance
- Check council permit requirements before placing a skip bin on a public street
- Disturb or demolish suspected asbestos-containing material without a licensed assessment first
- Dump C&D waste illegally on vacant land, in bushland, or on the roadside
- Mix hazardous waste (paint, chemicals, asbestos) into a general C&D skip bin
- Use unlicensed "cash job" waste removalists — you remain liable for where your waste ends up
- Overload a skip bin above its fill line, which can incur penalty fees and create a road hazard
- Place a skip bin on a public street without checking local council permit requirements
The Real Cost of Non-Compliant C&D Waste Disposal
Illegal dumping, unlicensed asbestos handling, and poor sorting all carry real costs — some in fines, and some in avoidable waste levy charges.
Construction & Demolition Waste — Sydney Metro Rates
Pricing varies by bin size, material mix, and hire duration. Rates below are indicative for Sydney Metro — contact us for a confirmed itemised quote.
Mini Skip (2m³–4m³)
From $320 per binIdeal for bathroom renos, small clean-outs, and single-room strip-outs.
Mid-Size Skip (6m³–10m³)
From $520 per binSuited to kitchen renovations, full strip-outs, and small extensions.
Large / Hook Bin (15m³–30m³)
From $850 per binFor full house builds, demolitions, and commercial projects with high volume.
Source-Separated Bins
POA per bin / projectDedicated concrete, timber, or metal bins — often cheaper overall than mixed-waste pricing.
| Material Stream | Typical Bin | Indicative Cost | Levy Impact | Recycling Pathway |
|---|---|---|---|---|
| Clean Concrete / Brick | Source-separated | Lower than mixed | Reduced | Crushed for road base / aggregate |
| Timber | Source-separated | Lower than mixed | Reduced | Mulching / recycling |
| Metal | Source-separated | Often rebated | Reduced | Scrap metal recycling |
| Mixed C&D Waste | General skip / hook bin | From $320/bin | Full levy on landfill portion | Sorted post-collection |
| Soil / Excavated Fill | Bulk bin | POA | Depends on contamination status | Reuse / licensed disposal |
| Asbestos-Containing Material | Licensed collection only | POA | N/A — specialist facility | Licensed asbestos landfill cell |
POA = Price on Application based on volume and site assessment. All prices are indicative for Sydney Metro and exclude council permit fees for street bin placement where applicable. Contact us for a confirmed itemised quote.
Construction & Demolition Waste Across Every NSW Sector
Zero Waste Services provides C&D waste collection for builders, demolition contractors, and homeowners across NSW, ACT, and Victoria.
Construction & Demolition Waste Service Areas
Zero Waste Services delivers skip and hook bins across Greater Sydney, regional NSW, Canberra, and Melbourne — with offices in Bankstown, Canberra, and Melbourne CBD.
Explore More Waste & Recycling Services
Construction and demolition sites often need more than one waste stream managed. Explore our other specialist collection and recycling services.
Related Reading on Construction & Demolition Waste
Guides from the Zero Waste Services blog covering C&D waste streams, concrete disposal, and demolition planning across our service regions.
Construction Demolition Waste
Our core guide to resource recovery, recycling, and responsible disposal for demolition and construction sites.
Read the guide → May. 18, 2026Construction Waste Management Melbourne
A comprehensive guide to managing C&D waste for builders, developers, and homeowners in Melbourne.
Read the guide → Blog GuideStrip Out Demolition
What strip-out demolition involves, and how to plan a project to minimise waste and avoid surprises.
Read the guide → May. 2, 2026Concrete Waste Disposal
Eco-friendly disposal methods for concrete waste, and why recycling beats landfilling for this heavy material.
Read the guide → May. 2, 2026Concrete Disposal in Australia
Why roughly 40% of Australia's waste comes from construction and demolition, and how proper concrete disposal helps.
Read the guide → Blog GuideSolid and Liquid Waste Management
How construction debris fits into the broader picture of solid waste management alongside other commercial streams.
Read the guide →Frequently Asked Questions
What can go in a construction and demolition skip bin?
Concrete, bricks, timber, metal offcuts, plasterboard, roofing material, and general mixed rubble. Asbestos-containing material, hazardous chemicals, batteries, and liquid waste cannot go in a general C&D skip and need a dedicated collection stream.
What bin size do I need for my project?
Mini skips (2m³–4m³) suit small renovations like a bathroom. Mid-size skips (6m³–10m³) suit kitchen renos and strip-outs. Large skips and hook bins (15m³–30m³) suit full house builds, extensions, and demolitions. We recommend the right size during your free quote assessment.
What if I find asbestos during demolition?
Stop work in that area immediately and do not disturb the material. Asbestos must be assessed and removed by a licensed asbestos removalist before demolition continues — it cannot be placed in a general skip bin. Call 1300 0WASTE for guidance, or see our Hazardous Waste Disposal service.
Does separating my waste actually save money?
Yes. The NSW Waste Levy applies to material sent to landfill, so separating concrete, timber, and metal into dedicated streams reduces the volume charged at the landfill rate — and metal in particular can sometimes attract a rebate rather than a cost.
How much does a skip bin cost in Sydney?
Pricing varies by bin size, material mix, and hire duration. As a guide for Sydney Metro: mini skips from $320, mid-size skips from $520, and large or hook bins from $850, with source-separated and soil bins priced on application. Contact Zero Waste Services for a confirmed, itemised quote within 24 hours.
Do I need a council permit for a skip bin?
If the bin will sit on a public street or footpath, most councils require a permit. If it fits entirely within your property (driveway, yard), a permit generally isn't required. We can advise on this during your quote.
Can you handle a full demolition project, not just a skip bin?
Yes. We support projects from a single mini skip through to large-scale demolition waste removal, including scheduled bin swaps and bulk collection for high-volume sites.
What areas does Zero Waste Services cover for construction and demolition waste?
Zero Waste Services provides C&D waste collection across NSW (including all Greater Sydney LGAs, Western Sydney, Central Coast, Hunter Valley, Illawarra, Blue Mountains, and regional NSW), ACT (Canberra), and Victoria (Melbourne). Our offices are at Bankstown NSW, Canberra ACT, and Melbourne VIC. Hotline: 1300 0WASTE (1300 092 783).
Request Your Free C&D Waste Quote Today
Licensed. Resource recovery first. Fully documented. Mini skip through to hook bin. No lock-in. Response within 24 hours — across NSW, ACT, and Victoria.